Telangana Police Syllabus: Telangana State Public Service Commission (TSPSC) has released a huge notification of Telangana Police by recruiting more than 15,000 posts this time and it subject to Telangana Police Syllabus 2018, all the post to be filled based on the written test or online test followed by Physical Enhancement Test (PET) and TS Police Physical Measurements and Requirements 2018 based. Those who are waiting for Telangana Police Jobs, try this year 2018-19. The Telangana Police is recruited under Police authorities only, there is no other third party involved.
Telangana Police department recruiting four type of Posts, which are completely different Telangana Police Syllabus, which are purely based on online Computer Based Test (CBT Test) or Offline OMR Sheet exam (Telangana Police decision final on the exam).
Types of Telangana Police Syllabus Posts
Police Recruitment 2023 Telangana
for 2018-19 year the Telangana State has recruiting almost 25000 posts, those who are eligible for Police Posts 2018 Telangana have to update the application form and post the application for both Police Constable and Sub Inspector Posts. Police Jobs in Telangana 2018 is more secure and profitable job in terms of benefits from Telangana Police government. Most respectable job in Telangana State. Jobs in Telangana is most accurate and secure job, those have a passion to work for nation and state can be apply for this job before or on June 30 2018. Apply before deadline date.
Now Telangana State recruiting more number of jobs, which are given as follows, Jobs in Telangana is more secure and safety jobs, Telangana is a number of state in India in terms of financial and as well as safety and secure matters.
Apply all Jobs in given in this
Given above four type of posts have different syllabus structures and question paper standard, before starting preparation Police Aspirant Candidate (PAC) have to keep a copy of Telangana Police Syllabus in the pocket for easy reference otherwise candidate may confuse at a certain time. Also, Make sure that there is few Telangana Police 2018 Posts Syllabus is revised, candidate have compared the previous year syllabus and current year syllabus. Always look at Revised Telangana Police Syllabus.
Download the Complete Telangana Police Syllabus Posts wise in below sections
Telangana Police Posts
SCT Police Constable CIVIL
The Selection procedure of the Police Civil is conducting exam in two phases, first one is Preliminary Test and the second Test is Main Test followed by document verification. Each post having a different Telangana Police Syllabus.
PRELIMINARY WRITTEN TEST SYLLABUS
FOR FINAL WRITTEN EXAMINATION SYLLABUS
SCT Sub Inspector Civil SI CIVIL | Telangana Police Syllabus
The Selection procedure of the Police Civil is conducting exam in two phases, first one is Preliminary Test and the second Test is Main Test followed by document verification. Post having different Telangana Police Syllabus.
A. ARITHMETIC & TEST OF REASONING / MENTAL ABILITY (OBJECTIVE TYPE)
Arithmetic: It will include questions on problems relating to number system, simple interest, compound interest, ratio & proportion, average, percentage, profit & loss, time & work, work & wages, time & distance, clocks & calendars, partnership, menstruation etc
Test of Reasoning: It will include questions of both verbal & non-verbal type and questions on analogies, similarities and differences, spatial visualization, spatial orientation, problem solving, analysis, judgment, decision making, visual memory etc
B. GENERAL STUDIES (OBJECTIVE TYPE)
FOR FINAL WRITTEN EXAMINATION SYLLABUS
PAPER I: ENGLISH (OBJECTIVE TYPE)
Qualifying Paper in English will be of Matriculation or equivalent standard. Questions of the standard of SSC / Matriculation seeking to ascertain the Candidate’s knowledge of Usage, Vocabulary, Grammar, Comprehension and other language skills will be asked for in the Objective Format
PAPER II: TELUGU / URDU (OBJECTIVE TYPE)
Candidates have to choose one of the languages i.e., either Telugu or Urdu and should indicate their choice as and when asked for by the recruiting authority. Option once exercised will be final and a candidate will not be allowed to change it subsequently
Qualifying Paper in Telugu or Urdu will be of Matriculation or equivalent standard. Questions of the standard of SSC / Matriculation seeking to ascertain the Candidate’s knowledge of Usage, Vocabulary, Grammar, Comprehension and other language skills will be asked for in the Objective Format.
PAPER III: ARITHMETIC & TEST OF REASONING / MENTAL ABILITY (OBJECTIVE TYPE)
Arithmetic: It will include questions on problems relating to number system, simple interest, compound interest, ratio & proportion, average, percentage, profit & loss, time & work, work & wages, time & distance, clocks & calendars, partnership, menstruation etc
Test of Reasoning: It will include questions of both verbal & non-verbal type and include question on analogies, similarities and differences, spatial visualization, spatial orientation, problem solving, analysis, judgment, decision making, visual memory etc
PAPER IV: GENERAL STUDIES (OBJECTIVE TYPE)
SCT Police Constable IT & C / Mechanic / Driver | Telangana Police Syllabus
The Selection procedure of the Police IT, Mechanic and Driver is conducting exam in one phase only, exam through written test only and followed by document verification. Each post have saperate Telangana Police syllabus, which is according to post oncept wise. Police authorities test the candidates as per subject knowedge wise. pick concerd syllabus for desired post.
SCT PC IT&C SYLLABUS | Telangana Police Syllabus
Telephone System: Basics of PSTN telephone network, Telephone instruments, EPABX, FAX, Internet telephony, GSM and CDMA phone system.
SCT PC MECHANIC SYLLABUS
Introduction to Automobiles, 4 and 2 Strokes Spark Ignition Engine, Compression Ignition, Engines and working principles, Petrol and Diesel Engine Components, Valve and operating Mechanism, Cooling System, Lubricating System, Fuel System in Petrol Engine, Ignition System Fuel Injunction System in diesel engines. Intake and Exhaust System, Battery, Automotive Electricity, Alternator, Dynamo, Cut out, Fuses, Self Starter, Wiring and Electrical Accessories, Brakes Transmission Systems, Wheel Alignment, Steering, Suspension, Mechanic Tolls, Work Shop Tools, Servicing of Vehicles, Check up of vehicles for Road Worthiness, Fleet Maintenance of vehicles, Safety Precautions.
SCT PC DRIVER SYLLABUS
Maintenance Responsibility, Drivers daily routine duty, Daily maintenance, Weekly Maintenance, Periodical Maintenance, Battery maintenance, its specific gravity, Tyres Maintenance and rotation, Fuel System, Ignition System, Lighting System, Brake System, Clutch & Transmission System, Fuel Accountability, Dash Board Instruments, Canopy and Seats Cleaning off Wind Screen and Wipers, Minor Repairs Viz. Fan Belt Replacements, Attending Wheel Punctures, Air Lock Removal, MV Act and Rules, Traffic Signals, First Aid Practice, Safety Precautions.
SCT Sub Inspector IT & C / ASI FPB | Telangana Police Syllabus
The Selection procedure of the Police Civil is conducting exam in two phases, first one is Primilinary Test and the second Test is Main Test followed by document verification.
SYLLABUS FOR PRELIMINARY WRITTEN TEST
Mother board peripherals, accessories, windows operating system, PC assembly and software installation, processor management, storage management, file systems, networking & LAN, basics of WAN, WAN protocols, networking management, system administration, web applications. Data structures using C, data base management concepts of SQL, schema objects, Programming Languages C,C++, Visual basics
Multiplexing and multiple access techniques: digital subscriber line, Frequency Division multiplexing and access, Time division multiplexing and multiple access, spread- spectrum, Code division multiple access. Teleconferencing.
Computer Hardware:
Computer Software:
Operating Systems: Computer fundamentals, DOS Commands, windows accessories & utilities.
Windows: Windows Generations – Installation and maintenance, File management, Creating user accounts and passwords, Administrative tools, Control panels, Services, Settings, Multimedia, printers.
Data Base Management, basic concepts, RDBMS, Data types, tables, views, transactions, concurrency, reports
Application Software:
MS-Office: MS- Word : Basics, file operations, formatting & editing text, tables, inserting objects and page design, macros and mail merge, creating documents and printing.
MS-Excel: Cell formatting, graphic objects and charts, database, pivot tables, data validation. Maths functions and calculations, templates, file protection and printing
MS Power Point: Essential elements of presentation, creating and adding slides, format, design, layout, slide show presentations and printing.
MS Access: Database, Tables, Data sheets, Queries, Forms, Date Entry and Editing. Reports.
Networking & Security Management:
The Topologies – Types of Networks: Local Area Networks (LAN), Metropolitan Networks (MAN), Wide Area Networks (WAN) – Firewall Policy, Packet filters, Application Gateway, Advanced authentication mechanism. Anti virus concepts, Encryption, VPN, Internet, Intranet
SYLLABUS FOR FINAL WRITTEN EXAMINATION
PAPER I: ENGLISH (OBJECTIVE TYPE)
Qualifying Paper in English will be of Matriculation or equivalent standard. Questions of the standard of SSC / Matriculation seeking to ascertain the Candidate’s knowledge of Usage, Vocabulary, Grammar, Comprehension and other language skills will be asked for in
PAPER II: ARITHMETIC & TEST OF REASONING / MENTAL ABILITY
Arithmetic: It will include questions on problems relating to number system, simple interest, compound interest, ratio & proportion, average, percentage, profit & loss, time & work, work & wages, time & distance, clocks & calendars, partnership, mensuration etc.
Test of Reasoning: It will include questions of both verbal & non-verbal type and include question on analogies, similarities and differences, spatial visualisation, spatial orientation, problem solving, analysis, judgment, decision making, visual memory etc
PAPER III: TECHNICAL PAPER
characteristics, applications. Transducers; Electronic measurements of non-electrical quantities like temperature, pressure, humidity etc. Basics of telemetry for industrial use.
Mother board peripherals, accessories, windows operating system, PC assembly and software installation, processor management, storage management, file systems, networking & LAN, basics of WAN, WAN protocols, networking management, system administration, web applications. Data structures using C, data base management concepts of SQL, schema objects, Programming Languages C,C++, Visual basics
amplifiers, nature of video signals. Sync Pulses and blanking pulses in the video signals, differentiating circuit used for pulse separation. Horizontal deflection principle. Principle of video cameras, video cassette recorder. Principle of closed circuit T.V. system. Video Conferencing
Multiplexing and multiple access techniques: digital subscriber line, Frequency Division multiplexing and access, Time division multiplexing and multiple access, spread- spectrum, Code division multiple access. Teleconferencing.
Computer Hardware:
Computer Software:
Operating Systems: Computer fundamentals, DOS Commands, windows accessories & utilities.
Windows: Windows Generations – Installation and maintenance, File management, Creating user accounts and passwords, Administrative tools, Control panels, Services, Settings, Multimedia, printers.
Data Base Management, basic concepts, RDBMS, Data types, tables, views, transactions, concurrency, reports
Application Software:
MS-Office: MS- Word : Basics, file operations, formatting & editing text, tables, inserting objects and page design, macros and mail merge, creating documents and printing.
MS Power Point: Essential elements of presentation, creating and adding slides, format, design, layout, slide show presentations and printing.MS-Excel: Cell formatting, graphic objects and charts, database, pivot tables, data validation. Maths functions and calculations, templates, file protection and printing
MS Access: Database, Tables, Data sheets, Queries, Forms, Date Entry and Editing. Reports.
Networking & Security Management:
The Topologies – Types of Networks: Local Area Networks (LAN), Metropolitan Networks (MAN), Wide Area Networks (WAN) – Firewall Policy, Packet filters, Application Gateway, Advanced authentication mechanism. Anti virus concepts, Encryption, VPN, Internet, Intranet
for more information on Telangana Police Syllabus 2018, comment below comment box for immediate revert from Police preparing candidates.
Table Of Contents
The post appeared first on .
Telangana Police Syllabus
Telangana Police department recruiting four type of Posts, which are completely different Telangana Police Syllabus, which are purely based on online Computer Based Test (CBT Test) or Offline OMR Sheet exam (Telangana Police decision final on the exam).
Types of Telangana Police Syllabus Posts
- Telangana Police Sub Inspector SI Posts
- Telangana Police Constable Posts – Police Squad
- Telangana Police Constable Posts – Information technology category (Office Work)
- Telangana Police Constable Posts – Police Station Office Works
Police Recruitment 2023 Telangana
for 2018-19 year the Telangana State has recruiting almost 25000 posts, those who are eligible for Police Posts 2018 Telangana have to update the application form and post the application for both Police Constable and Sub Inspector Posts. Police Jobs in Telangana 2018 is more secure and profitable job in terms of benefits from Telangana Police government. Most respectable job in Telangana State. Jobs in Telangana is most accurate and secure job, those have a passion to work for nation and state can be apply for this job before or on June 30 2018. Apply before deadline date.
Jobs in Telangana
Now Telangana State recruiting more number of jobs, which are given as follows, Jobs in Telangana is more secure and safety jobs, Telangana is a number of state in India in terms of financial and as well as safety and secure matters.
- – Sub Inspector Posts
- – Police Constable Posts
- Jobs
- Telangana TSPSC VRA Jobs
- Telangana TSPSC Steno Posts
- Telangana TSPSC Groups 4 Jobs
Apply all Jobs in given in this
Given above four type of posts have different syllabus structures and question paper standard, before starting preparation Police Aspirant Candidate (PAC) have to keep a copy of Telangana Police Syllabus in the pocket for easy reference otherwise candidate may confuse at a certain time. Also, Make sure that there is few Telangana Police 2018 Posts Syllabus is revised, candidate have compared the previous year syllabus and current year syllabus. Always look at Revised Telangana Police Syllabus.
Download the Complete Telangana Police Syllabus Posts wise in below sections
Telangana Police Posts
- SCCT Police Constable in CIVIL PC CIVIL.
- SCT Sub Inspector Civil
- SCT Police Constable IT & C / Mechanic / Driver
- SCT Sub Inspector IT & C / ASI FPB
SCT Police Constable CIVIL
The Selection procedure of the Police Civil is conducting exam in two phases, first one is Preliminary Test and the second Test is Main Test followed by document verification. Each post having a different Telangana Police Syllabus.
- Number of Vacancy Posts: 16,925 Posts
- Two Stages of Written exam for final selections
- Telangana Police Syllabus is based on posts you opted.
- Selection based highest score candidates along with caste reservation as per Telangana State guidelines.
PRELIMINARY WRITTEN TEST SYLLABUS
- English*
- Arithmetic
- General Science
- History of India, Indian culture, Indian National Movement.
- Indian Geography, Polity, and Economy
- Current events of national and international importance
- Test of Reasoning / Mental Ability
- Contents pertaining to the State of Telangana.
FOR FINAL WRITTEN EXAMINATION SYLLABUS
- English*
- Arithmetic
- General Science
- History of India, Indian culture, Indian National Movement.
- Indian Geography, Polity, and Economy
- Current events of national and international importance
- Test of Reasoning / Mental Ability
- Personality test (the questions will be from Ethics, Sensitivity to Gender and weaker sections, social awareness, Emotional Intelligence)
- Contents pertaining to the State of Telangana.
SCT Sub Inspector Civil SI CIVIL | Telangana Police Syllabus
The Selection procedure of the Police Civil is conducting exam in two phases, first one is Preliminary Test and the second Test is Main Test followed by document verification. Post having different Telangana Police Syllabus.
- Number of Vacancy Posts: 1,217 Posts
- Telangana Police Syllabus is based on posts you opted.
- Two Stages of the Written exam for final selections
- Selection based highest score candidates along with caste reservation as per Telangana State guidelines.
- PRELIMINARY WRITTEN TEST SYLLABUS
| Exam Paper | Subject | No.of Questions |
| PAPER I | ARITHMETIC & TEST OF REASONING / MENTAL ABILITY | 200 |
| PAPER II | GENERAL STUDIES | 200 |
A. ARITHMETIC & TEST OF REASONING / MENTAL ABILITY (OBJECTIVE TYPE)
Arithmetic: It will include questions on problems relating to number system, simple interest, compound interest, ratio & proportion, average, percentage, profit & loss, time & work, work & wages, time & distance, clocks & calendars, partnership, menstruation etc
Test of Reasoning: It will include questions of both verbal & non-verbal type and questions on analogies, similarities and differences, spatial visualization, spatial orientation, problem solving, analysis, judgment, decision making, visual memory etc
B. GENERAL STUDIES (OBJECTIVE TYPE)
- General Science – contemporary developments in science and technology and their implications including matters of everyday observation and experience, contemporary issues relating to protection of environment as may be expected of a well educated person who has not made a special study of any scientific discipline
- Current events of national and international importance
- History of India (including Indian National Movement) – emphasis will be on broad and general understanding of the subject in its social, economic, cultural and political aspects
- Geography of India
- Indian Polity and Economy – including the Country’s political system, rural development, planning and economic reforms in India
- Telangana Movement and State Formation – The idea of Telangana (1948-1970), Mobilization phase (1971-1990), towards the formation of Telangana State (1991-2014)
FOR FINAL WRITTEN EXAMINATION SYLLABUS
| Exam Paper | Subject | No.of Questions |
| PAPER I | ENGLISH | 200 |
| PAPER II | TELUGU / URDU | 200 |
| PAPER III | ARITHMETIC & TEST OF REASONING / MENTAL ABILITY | 200 |
| PAPER IV | GENERAL STUDIES | 200 |
PAPER I: ENGLISH (OBJECTIVE TYPE)
Qualifying Paper in English will be of Matriculation or equivalent standard. Questions of the standard of SSC / Matriculation seeking to ascertain the Candidate’s knowledge of Usage, Vocabulary, Grammar, Comprehension and other language skills will be asked for in the Objective Format
PAPER II: TELUGU / URDU (OBJECTIVE TYPE)
Candidates have to choose one of the languages i.e., either Telugu or Urdu and should indicate their choice as and when asked for by the recruiting authority. Option once exercised will be final and a candidate will not be allowed to change it subsequently
Qualifying Paper in Telugu or Urdu will be of Matriculation or equivalent standard. Questions of the standard of SSC / Matriculation seeking to ascertain the Candidate’s knowledge of Usage, Vocabulary, Grammar, Comprehension and other language skills will be asked for in the Objective Format.
PAPER III: ARITHMETIC & TEST OF REASONING / MENTAL ABILITY (OBJECTIVE TYPE)
Arithmetic: It will include questions on problems relating to number system, simple interest, compound interest, ratio & proportion, average, percentage, profit & loss, time & work, work & wages, time & distance, clocks & calendars, partnership, menstruation etc
Test of Reasoning: It will include questions of both verbal & non-verbal type and include question on analogies, similarities and differences, spatial visualization, spatial orientation, problem solving, analysis, judgment, decision making, visual memory etc
PAPER IV: GENERAL STUDIES (OBJECTIVE TYPE)
- General Science – contemporary developments in science and technology and their implications including matters of everyday observation and experience, contemporary issues relating to protection of environment as may be expected of a well educated person who has not made a special study of any scientific discipline
- Current events of national and international importance
- History of India – emphasis will be on broad general understanding of the subject in its social, economic, cultural and political aspects. Indian National Movement
- Geography of India
- Indian Polity and Economy – including the Country’s political system, rural development, planning and economic reforms in India
- Personality test (the questions will be from Ethics, Sensitivity to Gender and weaker sections, social awareness, Emotional Intelligence)
- Telangana Movement and State Formation – The idea of Telangana (1948-1970), Mobilization phase (1971-1990), towards formation of Telangana State (1991-2014).
SCT Police Constable IT & C / Mechanic / Driver | Telangana Police Syllabus
The Selection procedure of the Police IT, Mechanic and Driver is conducting exam in one phase only, exam through written test only and followed by document verification. Each post have saperate Telangana Police syllabus, which is according to post oncept wise. Police authorities test the candidates as per subject knowedge wise. pick concerd syllabus for desired post.
| Name of the Post | Name of Paper | Number of Questions |
| Information Technology and Communication | TECHNICAL PAPER | 200 |
| Mechanic | TECHNICAL PAPER | 200 |
| Driver | TECHNICAL PAPER | 200 |
- Number of Vacancy Posts: 231 Posts
- Two Stages of Written exam for final selections
- Telangana Police Syllabus is based on posts you opted.
- Selection based highest score candidates along with caste reservation as per Telangana State guidelines.
SCT PC IT&C SYLLABUS | Telangana Police Syllabus
- Electrical : Characteristic and Application of conductors, Insulators, Semiconductors; Construction of carbon, wire wound (linier logarithmic) resistors, thermistors potentio meters; Kircheff’s law, Ohms Law; principle of construction and special feature of simple meter, Moving iron/Moving coil meter, VTVM, Universal meter, Ohm meter and Ammeter; alternating current, A.C induced voltage, current; Faraday’s principle; lenses law of self induction; A.C generators and Fleming three finger rule, Frequency peak, average R.M.S values; Function and application of vibrators;
- Electronics & Radio: Characteristics and Application of inductance in a tuned circuit; Coil-Concept of reactance, phase, power factor, Inductance and co-efficient of coupling; series and parallel connection of capacitor in A.C circuits, different types of capacitors and their application, basic elements of resonance circuit, parallel L.C circuit, Anti resonance circuit, tuning and current gain, construction of Transistors, Bi-polar junction devises, PNP & NPN transistors and dynamic curves, principle of FET transistors, uses of diodes as rectifiers, Half wave and Full wave rectifier circuit, Bridge rectifiers, effect of ripples, uses of filters, carrier modulation (AM and FM) Single side band, Band width, Fidelity and quality construction in the receiver, detectors, discriminators, Range of Audio and quality construction in the receiver, detectors, discriminators, Range of Audio Frequency, Necessity for amplifications like Class ‘A’ ‘B’ and ‘C’, push-pull voltage amplifier, principle of superhydrodyne receiver, frequency conversion, I.F amplification, Principle of Magnetic sound recording, magnetic tapes, magnetic heads erasing head, Television principles, Construction and working principle of Picture tube Deflection camera tube, basic T.V. System scanning synchronization composite video signal.
- Basics of Computers : MS-Office (MS-word, EXCEL and Power point): Fundamentals of Computer Architecture, Mother board and peripherals, accessories, MS-DOS, Windows operating systems, PC assembly and software installation, networking & LAN, basics of WAN.
Telephone System: Basics of PSTN telephone network, Telephone instruments, EPABX, FAX, Internet telephony, GSM and CDMA phone system.
SCT PC MECHANIC SYLLABUS
Introduction to Automobiles, 4 and 2 Strokes Spark Ignition Engine, Compression Ignition, Engines and working principles, Petrol and Diesel Engine Components, Valve and operating Mechanism, Cooling System, Lubricating System, Fuel System in Petrol Engine, Ignition System Fuel Injunction System in diesel engines. Intake and Exhaust System, Battery, Automotive Electricity, Alternator, Dynamo, Cut out, Fuses, Self Starter, Wiring and Electrical Accessories, Brakes Transmission Systems, Wheel Alignment, Steering, Suspension, Mechanic Tolls, Work Shop Tools, Servicing of Vehicles, Check up of vehicles for Road Worthiness, Fleet Maintenance of vehicles, Safety Precautions.
SCT PC DRIVER SYLLABUS
Maintenance Responsibility, Drivers daily routine duty, Daily maintenance, Weekly Maintenance, Periodical Maintenance, Battery maintenance, its specific gravity, Tyres Maintenance and rotation, Fuel System, Ignition System, Lighting System, Brake System, Clutch & Transmission System, Fuel Accountability, Dash Board Instruments, Canopy and Seats Cleaning off Wind Screen and Wipers, Minor Repairs Viz. Fan Belt Replacements, Attending Wheel Punctures, Air Lock Removal, MV Act and Rules, Traffic Signals, First Aid Practice, Safety Precautions.
SCT Sub Inspector IT & C / ASI FPB | Telangana Police Syllabus
The Selection procedure of the Police Civil is conducting exam in two phases, first one is Primilinary Test and the second Test is Main Test followed by document verification.
| Name of the Posts | Written Test | Number of Questions |
| SCT SI IT & C / ASI FPB | Preliminary Examination | 200 |
| Main Examination | 600 |
- Telangana Police Syllabus is based on posts you opted.
- Number of Vacancy Posts: 55 Posts
- Two Stages of Written exam for final selections
- Selection based highest score candidates along with caste reservation as per Telangana State guidelines.
SYLLABUS FOR PRELIMINARY WRITTEN TEST
- Materials and Components: Structure of properties of Electronic Engineering, materials, conductors, semiconductors and insulators, magnetic, ferroelectric, piezoelectric, ceramic, optical and superconducting materials. Passive components and characteristics, Resistors, Capacitors and Inductors; Ferrites, Quartz crystal, Ceramic resonators, Electromagnetic and Electromechanical components.
- Physical Electronics, Electron Devices and ICs: Different types of diodes and their characteristics, Bipolar junction transistors, Field transistors, Field effect transistors, power switching devices like SCRs, CTOs, power MOSFETs Basics of ICs-bipolar, MOS and CMOS types, Basics of Opto- Electronics
- Network Theory: Network analysis techniques; Network theorem, transient and steady state sinusoidal response, Transmission criteria: delay and rise time Elmore’s and other definition, effect of cascading. Elements of network synthesis.
- Electromagnetic Theory: Transmission lines; basic theory, standing waves, matching applications, microstrip lines; Basics of wave guides and resonators; Elements of antenna theory.
- Electronic Measurements and Instrumentation: Basic concepts, standards and error analysis; Measurements of basic electrical quantities and parameters; Electronic measuring instruments and their principles of working; analog and digital comparition, characteristics, applications. Transducers; Electronic measurements of non-electrical quantities like temperature, pressure, humidity etc. Basics of telemetry for industrial use.
- Power Electronics: Power Semiconductor devices, Thyristor, Power transistor, MOSFETs Characteristics and operation, AC to DC convertors; 1 – phase and 3 phase DC to DC convertors, AC regulators, Thyristor controlled reactors, switched capacitor networks, Invertors; Single-phase and 3 phase, Pulse width modulation, Sinusoidal modulation with uniform sampling, Switched mode power supplies.
- Analog Electronic Circuits: Transistor biasing and stabilization, small signal analysis, Power amplifiers, Frequency response, Wide band techniques, Feedback amplifiers, Tuned amplifiers, Oscillators, Rectifiers and Power supplies, Operational Amplifier, other linear integrated circuits and applications, Pulse shaping circuits and waveform generators.
- Digital Electronic Circuits: Transistors as a switching element; Boolean algebra; simplification of Boolean functions; Karnaught Map and applications; IC logic gates and their characteristics; IC logic families; DTL, TTL, ECL, NMOS, PMOS and CMOS gates and their comparison; Combinational logic circuits; Half adder; full adder, Digital Comparator; Multiplexer De-multiplexer; ROM and their applications; Flip-flops, R-S, J-K, D and T flip-flops; Different types of counters and registers; waveform generators; A/D and D/G convertors; Semiconductor memories.
- Communication Systems and antennas: Basic information theory, Modulation and detection in analogue and digital systems, Sampling and data reconstruction, Quantization & Coding, time division and frequency division multiplexing, Equalisation, Optical Communication; in free space & fiber optic; frequency spectrum analysis, Propagation of signals at HF, VHF, UHF and microwave frequency; Satellite communication, and Mobile communications. Antennas, applications, cellular and PCS antennas.
- Microwave Engineering: Microwave tubes and solid state devices, Microwave generation and amplifiers, Wave guides and other Microwave Components and Circuits, Micro-strip circuits, Microwave antennas, Microwave measurements, Masers Lasers Microwave propagation. Microwave Communication Systems- terrestrial and satellite based.
- Computer Engineering: Number Systems; Data representation, Programming; Elements of a high level programming languages, use of basic data structures, Fundamentals of computer architecture processor design, Control unit design, Memory organization, I/O system organization, Personal computer and their typical uses.
Mother board peripherals, accessories, windows operating system, PC assembly and software installation, processor management, storage management, file systems, networking & LAN, basics of WAN, WAN protocols, networking management, system administration, web applications. Data structures using C, data base management concepts of SQL, schema objects, Programming Languages C,C++, Visual basics
- Microprocessors: Microprocessor Architecture-Instruction set and simple assembly, language programming, Interfacing for memory and I/C, Applications of Microprocessor in Telecommunications and power system.
- Television Engineering: Picture tube construction and working principle. Deflections Camera tubes, Basic T.V. system. Scanning, Synchronization, Composite Video Signals, aspect ratio, resolution, flickering, pictures, sound broad casting in F.M., V.H.F. and U.H.F. Channels, typical response of video I.F. amplifiers, use of wave traps, video amplifiers, nature of video signals. Sync Pulses and blanking pulses in the video signals, differentiating circuit used for pulse separation. Horizontal deflection principle. Principle of video cameras, video cassette recorder. Principle of closed circuit T.V. system. Video Conferencing
- Radars and Landing systems: Principles of operation of Radar, Radar range equation, modification of Radar range equation considering receiver noise and radar frequencies. Working of Pulsed radar, function of duplexer and modulator, Radar beacon. Principle of C.W radar, Doppler frequency shift, FMCW radar, FM altimeter, display systems, Basic principles of MTI radar and Tracking radar. Aircraft landing systems, ILS, GCA, ARSR and SRA.
- Control systems: Transient and steady state response of control systems, effect of feedback on stability and sensitivity, Root locus techniques; Frequency response analysis, concepts of gain and phase margins, Constant-M and Constant-N Nichol’s chart, Approximation of transient response from closed loop frequency response, Design of Control Systems, Compensators Industrial controllers.
- Telephone Systems: PSTN telephone network, Local Loops, signals and noise in telephone systems, telephone instruments, FDM, Digital transmission, digital Local loops, EPABX, FAX, internet telephony. GSM and CDMA phone system
Multiplexing and multiple access techniques: digital subscriber line, Frequency Division multiplexing and access, Time division multiplexing and multiple access, spread- spectrum, Code division multiple access. Teleconferencing.
Computer Hardware:
- Computer Architecture: Fundamentals of Computers, PC Assembling, Installation, Trouble Shooting, Viruses.
- The Memory System: Memory Hierarchy, ROM, RAM, DRAM, Storage Devices, Secondary memory and RAID and its Levels; Concepts of high speed memories, CPU, NIC cards.
- Computer Peripherals: Keyboard, Mouse, Video Cards, Monitors, Liquid Crystal Displays (LCD), Digital Camera, Sound Cards, Printers, Modems, Scanners, Power Supply and etc.
Computer Software:
Operating Systems: Computer fundamentals, DOS Commands, windows accessories & utilities.
Windows: Windows Generations – Installation and maintenance, File management, Creating user accounts and passwords, Administrative tools, Control panels, Services, Settings, Multimedia, printers.
Data Base Management, basic concepts, RDBMS, Data types, tables, views, transactions, concurrency, reports
Application Software:
MS-Office: MS- Word : Basics, file operations, formatting & editing text, tables, inserting objects and page design, macros and mail merge, creating documents and printing.
MS-Excel: Cell formatting, graphic objects and charts, database, pivot tables, data validation. Maths functions and calculations, templates, file protection and printing
MS Power Point: Essential elements of presentation, creating and adding slides, format, design, layout, slide show presentations and printing.
MS Access: Database, Tables, Data sheets, Queries, Forms, Date Entry and Editing. Reports.
Networking & Security Management:
The Topologies – Types of Networks: Local Area Networks (LAN), Metropolitan Networks (MAN), Wide Area Networks (WAN) – Firewall Policy, Packet filters, Application Gateway, Advanced authentication mechanism. Anti virus concepts, Encryption, VPN, Internet, Intranet
SYLLABUS FOR FINAL WRITTEN EXAMINATION
PAPER I: ENGLISH (OBJECTIVE TYPE)
Qualifying Paper in English will be of Matriculation or equivalent standard. Questions of the standard of SSC / Matriculation seeking to ascertain the Candidate’s knowledge of Usage, Vocabulary, Grammar, Comprehension and other language skills will be asked for in
PAPER II: ARITHMETIC & TEST OF REASONING / MENTAL ABILITY
Arithmetic: It will include questions on problems relating to number system, simple interest, compound interest, ratio & proportion, average, percentage, profit & loss, time & work, work & wages, time & distance, clocks & calendars, partnership, mensuration etc.
Test of Reasoning: It will include questions of both verbal & non-verbal type and include question on analogies, similarities and differences, spatial visualisation, spatial orientation, problem solving, analysis, judgment, decision making, visual memory etc
PAPER III: TECHNICAL PAPER
- Materials and Components: Structure of properties of Electronic Engineering, materials, conductors, semiconductors and insulators, magnetic, ferroelectric, piezoelectric, ceramic, optical and superconducting materials. Passive components and characteristics, Resistors, Capacitors and Inductors; Ferrites, Quartz crystal, Ceramic resonators, Electromagnetic and Electromechanical components.
- Physical Electronics, Electron Devices and ICs: Different types of diodes and their characteristics, Bipolar junction transistors, Field transistors, Field effect transistors, power switching devices like SCRs, CTOs, power MOSFETs Basics of ICs-bipolar, MOS and CMOS types, Basics of Opto-Electronics
- Network Theory: Network analysis techniques; Network theorem, transient and steady state sinusoidal response, Transmission criteria: delay and rise time Elmore’s and other definition, effect of cascading. Elements of network synthesis.
- Electromagnetic Theory: Transmission lines; basic theory, standing waves, matching applications, microstrip lines; Basics of wave guides and resonators; Elements of antenna theory.
- Electronic Measurements and Instrumentation: Basic concepts, standards and error analysis; Measurements of basic electrical quantities and parameters; Electronic measuring instruments and their principles of working; analog and digital comparition,
characteristics, applications. Transducers; Electronic measurements of non-electrical quantities like temperature, pressure, humidity etc. Basics of telemetry for industrial use.
- Power Electronics: Power Semiconductor devices, Thyristor, Power transistor,
MOSFETs Characteristics and operation, AC to DC convertors; 1 – phase and 3 phase DC to DC convertors, AC regulators, Thyristor controlled reactors, switched capacitor networks, Invertors; Single-phase and 3 phase, Pulse width modulation, Sinusoidal modulation with uniform sampling, Switched mode power supplies. - Analog Electronic Circuits: Transistor biasing and stabilization, small signal analysis, Power amplifiers, Frequency response, Wide band techniques, Feedback amplifiers, Tuned amplifiers, Oscillators, Rectifiers and Power supplies, Operational Amplifier, other linear integrated circuits and applications, Pulse shaping circuits and waveform generators.
- Digital Electronic Circuits: Transistors as a switching element; Boolean algebra; simplification of Boolean functions; Karnaught Map and applications; IC logic gates and their characteristics; IC logic families; DTL, TTL, ECL, NMOS, PMOS and CMOS gates and their comparison; Combinational logic circuits; Half adder; full adder, Digital Comparator; Multiplexer De-multiplexer; ROM and their applications; Flip-flops, R-S, J-K, D and T flip-flops; Different types of counters and registers; waveform generators; A/D and D/G convertors; Semiconductor memories.
- Communication Systems and antennas: Basic information theory, Modulation and detection in analogue and digital systems, Sampling and data reconstruction, Quantization & Coding, time division and frequency division multiplexing, Equalisation, Optical Communication; in free space & fiber optic; frequency spectrum analysis, Propagation of signals at HF, VHF, UHF and microwave frequency; Satellite communication, and Mobile communications. Antennas, applications, cellular and PCS antennas.
- Microwave Engineering: Microwave tubes and solid state devices, Microwave generation and amplifiers, Wave guides and other Microwave Components and Circuits, Micro-strip circuits, Microwave antennas, Microwave measurements, Masers Lasers Microwave propagation. Microwave Communication Systems- terrestrial and satellite based.
- Computer Engineering: Number Systems; Data representation, Programming; Elements of a high level programming languages, use of basic data structures, Fundamentals of computer architecture processor design, Control unit design, Memory organization, I/O system organization, Personal computer and their typical uses.
Mother board peripherals, accessories, windows operating system, PC assembly and software installation, processor management, storage management, file systems, networking & LAN, basics of WAN, WAN protocols, networking management, system administration, web applications. Data structures using C, data base management concepts of SQL, schema objects, Programming Languages C,C++, Visual basics
- Microprocessors: Microprocessor Architecture-Instruction set and simple assembly, language programming, Interfacing for memory and I/C, Applications of Microprocessor in Telecommunications and power system.
- Television Engineering: Picture tube construction and working principle. Deflections Camera tubes, Basic T.V. system. Scanning, Synchronization, Composite Video Signals, aspect ratio, resolution, flickering, pictures, sound broad casting in F.M., V.H.F. and U.H.F. Channels, typical response of video I.F. amplifiers, use of wave traps, video
amplifiers, nature of video signals. Sync Pulses and blanking pulses in the video signals, differentiating circuit used for pulse separation. Horizontal deflection principle. Principle of video cameras, video cassette recorder. Principle of closed circuit T.V. system. Video Conferencing
- Radars and Landing systems: Principles of operation of Radar, Radar range equation, modification of Radar range equation considering receiver noise and radar frequencies. Working of Pulsed radar, function of duplexer and modulator, Radar beacon. Principle of C.W radar, Doppler frequency shift, FMCW radar, FM altimeter, display systems, Basic principles of MTI radar and Tracking radar. Aircraft landing systems, ILS, GCA, ARSR and SRA.
- Control systems: Transient and steady state response of control systems, effect of feedback on stability and sensitivity, Root locus techniques; Frequency response analysis, concepts of gain and phase margins, Constant-M and Constant-N Nichol’s chart, Approximation of transient response from closed loop frequency response, Design of Control Systems, Compensators Industrial controllers.
- Telephone Systems: PSTN telephone network, Local Loops, signals and noise in telephone systems, telephone instruments, FDM, Digital transmission, digital Local loops, EPABX, FAX, internet telephony. GSM and CDMA phone system
Multiplexing and multiple access techniques: digital subscriber line, Frequency Division multiplexing and access, Time division multiplexing and multiple access, spread- spectrum, Code division multiple access. Teleconferencing.
Computer Hardware:
- Computer Architecture: Fundamentals of Computers, PC Assembling, Installation, Trouble Shooting, Viruses.
- The Memory System: Memory Hierarchy, ROM, RAM, DRAM, Storage Devices, Secondary memory and RAID and its Levels; Concepts of high speed memories, CPU, NIC cards.
- Computer Peripherals: Keyboard, Mouse, Video Cards, Monitors, Liquid Crystal Displays (LCD), Digital Camera, Sound Cards, Printers, Modems, Scanners, Power Supply and etc.
Computer Software:
Operating Systems: Computer fundamentals, DOS Commands, windows accessories & utilities.
Windows: Windows Generations – Installation and maintenance, File management, Creating user accounts and passwords, Administrative tools, Control panels, Services, Settings, Multimedia, printers.
Data Base Management, basic concepts, RDBMS, Data types, tables, views, transactions, concurrency, reports
Application Software:
MS-Office: MS- Word : Basics, file operations, formatting & editing text, tables, inserting objects and page design, macros and mail merge, creating documents and printing.
MS Power Point: Essential elements of presentation, creating and adding slides, format, design, layout, slide show presentations and printing.MS-Excel: Cell formatting, graphic objects and charts, database, pivot tables, data validation. Maths functions and calculations, templates, file protection and printing
MS Access: Database, Tables, Data sheets, Queries, Forms, Date Entry and Editing. Reports.
Networking & Security Management:
The Topologies – Types of Networks: Local Area Networks (LAN), Metropolitan Networks (MAN), Wide Area Networks (WAN) – Firewall Policy, Packet filters, Application Gateway, Advanced authentication mechanism. Anti virus concepts, Encryption, VPN, Internet, Intranet
for more information on Telangana Police Syllabus 2018, comment below comment box for immediate revert from Police preparing candidates.
Table Of Contents
The post appeared first on .